Viessmann E00T, Инструкции по установке и обслуживанию для подрядчиков

Страница: 39 / 100

39
Commissioning steps
Inspection steps
Maintenance steps Page
• • •
1. Removing the front panels ................................................................................................ 40
•
2. Checking the power supply
•
3. Switching on the power supply for the fuel cell module ................................................ 41
•
4. Commissioning the system with the commissioning assistant .................................... 41
•
5. Filling the system separation circuit ................................................................................ 42
•
6. Filling the secondary circuit .............................................................................................. 44
•
7. Filling the fuel cell module trap ........................................................................................ 46
• • •
8. Checking all connections on the heating water side for leaks
•
9. Entering heating contractor contact details .................................................................... 47
•
10. Commissioning the fuel cell module ................................................................................ 47
•
11. Starting maintenance mode .............................................................................................. 47
•
12. Changing the gas type on the fuel cell module ............................................................... 48
•
13. Adjusting parameters for the mains monitor (ENS) (country setting) .......................... 49
• •
14. Filling with distilled water and starting the system ........................................................ 49
• •
15. Terminating maintenance mode and activating energy manager ................................. 50
• •
16. Checking the balanced flue system for tightness (annular gap test) ........................... 51
•
17. 5-yearly maintenance of fuel cell module ........................................................................ 52
•
18. 10-yearly maintenance of fuel cell module ...................................................................... 53
•
19. Checking the diaphragm expansion vessel and pressure in the system separation
circuit ................................................................................................................................... 54
• •
20. Check the external diaphragm expansion vessel (heating circuits) and the system
pressure .............................................................................................................................. 54
• • •
21. Checking the safety valve function
• • •
22. Checking the electrical connections for firm seating
• • •
23. Checking gas equipment on the fuel cell module for leaks at operating pressure ..... 55
• •
24. Checking the combustion quality ..................................................................................... 56
• • •
25. Checking the flue system for unrestricted flow and leaks
• • •
26. Fitting the front panels (fuel cell module) ........................................................................ 56
•
27. Instructing the system user .............................................................................................. 56
Commissioning, inspection, maintenance
Steps - commissioning, inspection and maintenance
5839343