Viessmann E00T, Инструкции по установке и обслуживанию для подрядчиков

Страница: 42 / 100

42
3. Select by which means commissioning will be car-
ried out:
■ Commissioning assistant integrated in the pro-
gramming unit:
"by panel"
■ Software tool (e.g. "ViStart" commissioning app):
"by software tool"
Commissioning via ViStart app:
■ Select menu item "by software tool" .
■ Download "ViStart" commissioning app from
Google Play Store or Apple App Store and
install.
■ Register as contractor
■ Following selection on the selection screen, the
appliance automatically switches on the local
WiFi access point of the control unit, for commis-
sioning via "ViStart".
■ Connect the mobile end device with the WiFi
access point.
The network key (SSID) and local password are
shown on the screen.
■ Confirm with "OK" after successful connection.
■ For commissioning, follow the instructions on the
app.
4. Test mode "OFF"
Note
Only for demonstration purposes.
Do
not select for normal operation.
5. Optional settings and functions for commissioning:
■ "Language"
■ "Measuring units"
■ "Date and time"
6. When all the required commissioning steps have
been performed, tap
.
Safety instructions are shown on the display.
7. After checking them, acknowledge the safety
instructions with
.
8. Confirm "Do you want to finish the start-up?"
with .
Calling up the commissioning assistant at a later
point
If you need to continue commissioning later, the com-
missioning assistant can be reactivated at any time.
Tap the following buttons:
1.
2. "Service"
3. Enter password "viservice".
4. "Commissioning"
5. to confirm
Switching internet ON/OFF
The system can be remotely controlled via the internet
using an app. Switch the internet connection ON and
establish a connection to the router.
Activating the internet connection
Operating instructions
The access code required for commissioning can be
found on the label affixed to the programming unit.
Stick one of the labels with the access code in these
operating instructions so that you can find it again
when you need it:
Fig. 34
Affix another access code label in the marked location
on the type plate.
Filling the system separation circuit
Note
The system is equipped with hydraulic system separa-
tion. The on-site secondary circuit and the system sep-
aration circuit must each be filled separately.
Commissioning, inspection, maintenance
Commissioning the system with the commissioning…
(cont.)
5839343