Videotron EMG2926-Q10A, Руководство пользователя, Страница: 65 / 178

Chapter 7 Monitor
EMG2926-Q10A User’s Guide
65
The following table describes the labels on this screen.
7.4 IPv6 Neighbor Table
Click Monitor > IPv6 Neighbor Table . Use this screen to view IPv6 neighbor information for the
EMG2926-Q10A.
Figure 39
Monitor > IPv6 Neighbor Table
The following table describes the labels on this screen.
Table 21
Monitor > DHCP Table
LABEL DESCRIPTION
# This is the host computer’s index number.
Status This field displays whether the connection to the host computer is up (yellow lightbulb) or
down (grey lightbulb).
Host Name This field displays the computer’s host name.
IP Address This field displays the IP address corresponding to the # field.
MAC Address This field shows the MAC address of the computer designated in the Host Name field.
Every Ethernet device is identified by a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02.
Interface This field shows the interface the host computer is connected to.
Reserve Check if you want to reserve the IP address for this specific MAC address.
Apply Click Apply to save your changes to the EMG2926-Q10A.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 22
Monitor > IPv6 Neighbor Table
LABEL DESCRIPTION
# This is the neighboring device’s index number.
Link Local
Address This field displays the neighboring device’s link-local IPv6 address.