Chapter 12 NAT
EMG2926-Q10A User’s Guide
110
The following table describes the labels on this screen.
Table 52
Network > NAT > Port Forwarding Edit
LABEL
DESCRIPTION
Port Forwarding
Select
Enable
to turn on this rule and the requested service can be forwarded to the host
with a specified internal IP address.
Select
Disable
to disallow forwarding of these ports to an inside server without having to
delete the entry.
Service Name
Type a name (of up to 31 printable characters) to identify this rule in the first field beside
Service Name
. Otherwise, select a predefined service in the second field beside
Service
Name
.
Protocol
Select the transport layer protocol supported by this virtual server. Choices are
TCP
,
UDP
,
or
TCP_UDP
.
If you have chosen a pre-defined service in the
Service Name
field, the protocol will be
configured automatically.
Port Range
Type an internal port number(s) to define the service to be forwarded to the specified
server.
To specify a range of ports, enter the first and last port.
Translation Port
Range
Type the first and last external port number that identifies a service.
Server IP
Address
Type the IP address of the server on your LAN that receives packets from the port(s)
specified in the
Port
field.
Back
Click
Back
to return to the previous screen.
Apply
Click
Apply
to save your changes with the EMG2926-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Содержание EMG2926-Q10A
Страница 10: ...10 PART I User s Guide...
Страница 17: ...Chapter 1 Introduction EMG2926 Q10A User s Guide 17 Figure 5 Wall Mounting Example...
Страница 61: ...Chapter 6 Tutorials EMG2926 Q10A User s Guide 61...
Страница 62: ...62 PART II Technical Reference...
