Videotron EMG2926-Q10A Скачать руководство пользователя страница 172

Страница: 172 / 178

EMG2926-Q10A User’s Guide

172

HAPTER

Troubleshooting

27.1 Overview

This chapter offers some suggestions for solving problems you might encounter. The potential
problems are divided into the following categories.

•

Power, Hardware Connections, and LEDs

•

EMG2926-Q10A Access and Login

•

Internet Access

•

Resetting the EMG2926-Q10A to Its Factory Defaults

•

Wireless Connections

•

USB Device Problems

27.2 Power, Hardware Connections, and LEDs

The EMG2926-Q10A does not turn on. None of the LEDs turn on.

Make sure you are using the power adaptor or cord included with the EMG2926-Q10A.

Make sure the power adaptor or cord is connected to the EMG2926-Q10A and plugged in to an
appropriate power source. Make sure the power source is turned on.

Disconnect and re-connect the power adaptor or cord to the EMG2926-Q10A.

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

Make sure you understand the normal behavior of the LED. See

Section 1.7 on page 14

Check the hardware connections. See the Quick Start Guide.

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

Disconnect and re-connect the power adaptor to the EMG2926-Q10A.

Содержание EMG2926-Q10A



















































































































































































Результаты поиска

Содержание EMG2926-Q10A

Отзывы:

Videotron EMG2926-Q10A, Руководство пользователя, Страница: 172 / 178

Результаты поиска

Содержание EMG2926-Q10A

Отзывы: