Videotec SW164OSM, Руководство по эксплуатации

Страница: 42 / 135

Page 5 SW164OSM 9901
2 SW164OSM, optional cards and peripheral units
2.1 Features of the SW164OSM 4 video matrix
The SW164OSM video matrix is a professional product for security and safety applications. In a
security system the matrix controls 16 video inputs (cameras) on 4 outputs (monitors), by means of
KEYPLUS and DCS2 control keyboards.
In the following table the main features are described, with factory settings marked by *.
Features :
•
On screen configuration of the matrix working parameters.
•
4 national languages : Italian, English*, French and German.
•
Two independent automatic sequence cycles for each operator : day and night cycles (default*: input #
1 on all outputs permanently).
•
Management of 16 alarm contacts :
⋅
alarm contacts individually configurable as normally open*/closed/not used
⋅
alarm groups, with distinct dwell times for each alarmed input (default*: 2 seconds)
⋅
management of continuous/pulse* alarms
⋅
acknowledgement of all active alarms*/only last one
•
4 reset types of the alarm condition :
⋅
from keyboard : a reset password may be asked to the operator
⋅
external reset
⋅
time reset : from 5 seconds to 1 hour after the last alarm
⋅
automatic reset: at the end of a continuous alarm signal
•
For each operator a set of alarm contacts to be controlled may be defined (default*: each operators
controls all contacts)
•
Warning buzzer of alarm condition (default*: on)
•
24-character identification texts of the video inputs
⋅
one video output is already provided with character generator
⋅
3 video outputs allow the introduction of the optional ID07 card for character generation (one for
each output)
•
Up/Down function for quick selection of video inputs
•
On screen date and hour, with configured format and position
•
Control of VTR trigger, for the recording of inputs on magnetic tape, with a minimum switching time of
20msec
•
Control of a serial printer for event recording (alarms, reset, matrix on, matrix off)
⋅
selectable printer Baudrate: 300, 1200, 2400 or 9600* baud
•
Simplified communication protocol
⋅
transmission of event messages to a PC, for event recording and management (alarms, reset,
matrix on, matrix off, program mode beginning and end)
•
Variable Baudrate control of peripheral devices (300, 1200, 2400 and 9600* baud) to simplify the use
of analogue/digital transmission devices such as modem, fibers, radio links, etc.
•
Compatibility with PAL* and NTSC video systems
•
Transmission mode: RS232* or Current Loop, with internal jumper selection