Page 31 SW164OSM 9901
The generic parameters which define the functioning of the whole video system and concern all operators
are set at matrix level.
Change of language
Configuration :
Selection of the national language
The configuration must be carried out on all keyboards (menu
1.Language
) and on the matrix (menu 1.
Language
).
Input and output selection
Configuration :
Block of some inputs
menu
5.Enablings
of the keyboard : if some inputs are disabled
since the operator has not to look over them, it is better to block
also the up/down keys (
5.Enablings, Keys
).
Block of some outputs
menu
5.Enablings
of the keyboard ; if the installation is
controlled by more operators, it is advisable to block the outputs
which each operator cannot see directly on a monitor.
Block of the up/down keys
menu
5.Enablings, Keys
of the keyboard.
Selection of the inputs visible on up/down
menu
5.Active inputs
of the matrix.
Definition of the switching cycles
menu
2.Switching cycles
of the matrix.
Alarms
Configuration :
Description of the alarm types, contacts and
switching cycle groups
menu
3.Alarms
of the matrix and connected submenus.
Configuration of the reset types
menu
3.4 Alarm reset
of the matrix
Enabling of the reset from keyboard
If enabled on the menu
3.4 Alarm reset
of the matrix, the reset
from keyboard can be accompanied by the request for a reset
password : this password is defined at keyboard level. It can be
different for each of the operators, and eventually disabled.
Alarm buzzer
menu
3.6 Other parameters
of the matrix ; menu 8.
Buzzer
of
each individual keyboard
Password
Configuration :
Set the passwords
menu
6.Passwords
of each keyboard
Disable the passwords
menu
6.Passwords
of each keyboard : set the password to
000000.
Содержание SW164OSM
