NVR User Manual
40
Add Group
: You can add a group and set group rights.
On the
Add Group
screen, set the group name and group rights, including control panel, device
shutdown, real‐time surveillance, playback, network preview, recording, record backup, hard disk
management, account management, system information check, alarm input/output setting, log check,
log deletion, system upgrade, maintenance, general setting, coding setting, record setting, serial port
setting, network setting, alarm setting, video detection, display, and default.
Modify Group
: You can modify the properties of an existing group.
Add User
: You can add users to a group and set user rights.
Two default users are available: user
admin
and user
guest
. User
admin
has the highest rights. User
guest
has lower rights, including control panel, surveillance, playback, and network preview. The default
password of the two users is
123456
.
On the
Add User
screen, type the user name and password, select a group, and determine whether to
reuse the user. If
Reusable
is selected, the account can be used on the local device or on the network.
indicates that the option is selected.
When a group is selected, rights assigned to the group members cannot exceed the group rights.
To facilitate account management, assign lower rights to common users than senior users.
Modify User
: You can modify the properties of an existing user.
Delete User
: You can delete an existing user.
