NVR User Manual
35
Language
: At present, 14 languages are supported, including Chinese Simplified, English, and Spanish.
HDD Full
: It can be set to
Stop
or
Overwrite
. The conditions for stopping recording are as follows: An
overwrite operation is being performed on the current working disk, or the current working disk is full
and the next disk is not empty. The conditions for overwriting are as follows: The current working disk is
full, and the next disk is not empty. In this case, the earliest record file will be overwritten cyclically.
DVR No.
: It indicates the number of the NVR. It allows you to control one or more NVRs by using a
remote control. The address of the remote control must be corresponding to the value of
DVR No.
DST
: You can set the start time and end time by week or date.
Resolution
: The resolution of videos can be set to
600*800
,
1024*768
, or
1280*720
.
3.6.2 Network
IP Address
/
Subnet Mask
/
Gateway
: Set the IP address by using the numeric keys on the panel. Then set
the subnet mark and gateway for the IP address.
?
Note
: The default IP address of the NVR is
192.168.1.88
, the default subnet mask is
255.255.255.0
,
and the default gateway is
192.168.1.0
.
DHCP
:
indicates that dynamic address assignment is enabled, and fixed IP addresses are not used.
TCP Port
: The default port ID is 34567. You can set the port as required.
HTTP Port
: The default port ID is 80. You can set the port as required.
UDP Port
: The default port ID is 37778. You can set the port as required.
Max Connection
: It ranges from 0 to 50. If it is set to
0
, no access from users is allowed. A maximum
number of 50 users can be connected.
ADVANCED SETTING
:
Double‐click an option for further settings.
