NVR User Manual
22
?
Notes
:
For details about record playback, see section
3.4.2 Record Playback
.
For details about record backup, see section
3.4.3 Backup
.
For details about alarm output, see section
3.5.4 Alarm Output
.
For details about TV adjustment, see section
3.6.3 Display
.
For details about system shutdown, see section
3.7.7 Shut Down
.
3.2.1 Record Control
Channel
: All channel numbers of the device are listed. The number of channel numbers is consistent with
the maximum number of channels supported by the device.
Status
: The current status of the corresponding channel is displayed. A channel may be in the
Always
,
Config
, or
Close
status. Selected channels are marked by .
l
Always
: This status has the top priority. After the
Always
status is enabled, common recording is
enabled in corresponding channels despite the status of the channels.
l
Config
: It enables recording based on the
Timer
,
Motion
, and
Alarm
settings on the
Record
Setting
screen.
l
Close
: It stops recording in all channels.
Start All
: It enables recording in all channels.
Stop All
: It stops recording in all channels.
1. Start/stop recording in one or more channels.
Before you start/stop recording in a channel, check the record state ﴾○ or ﴿ of the channel. ○
indicates that the channel is not in the recording state, and
indicates that the channel is in the
recording state.
If
Always
is marked by
for a channel, automatic recording is enabled for the channel. If
Close
is
marked by
for a channel, automatic recording is disabled for the channel.
If
Config
is marked by
for a channel, scheduled recording is enabled for the channel. If
Close
is
marked by
for a channel, scheduled recording is disabled for the channel.
You can start/stop recording in other channels by repeating the preceding operations.
2. Start recording in all channels.
To enable automatic recording in all channels, select
Always
﴾ ﴿ for
All
. After automatic recording is
enabled in all channels, the NVR starts recording based on the
Timer
,
Motion
, and
Alarm
settings
on the
Record Setting
screen and provides automatic recording channels.
