NVR User Manual
15
1.
Unscrew the screws, and remove the cover.
2.
Unscrew the hard disk slot screws, and take out the hard disk slot from the chassis.
3.
Put a hard disk in the hard disk slot and fix the hard disk into the hard disk slot with screws.
4.
Install the hard disk slot into the chassis, and fix it with screws.
5.
Install the cover, and fix it with screws.
2.3 Device Installation
Procedure and precautions:
1.
Lay the device on a flat and stable rack.
2.
Ensure that the temperature in the room is below 35ºC ﴾95ºF﴿.
3.
Leave a 15 cm ﴾6 in.﴿ space around the device for air circulation.
4.
Install assemblies on the rack from bottom to top.
5.
When multiple assemblies are installed on the rack, take proper measures to avoid overload of the
power socket on the rack.
2.4 Video Input and Output Connections
Video input connections ﴾LAN﴿
l
Connect network cameras to the NVR. If only one network camera is available, connect it to the NVR
directly through a network cable. If multiple network cameras are available, connect them to the
NVR through a switch.
Video output connections ﴾VGA, VIDEO OUT, HDMI﴿
l
The NVR supports VGA and CVBS video outputs. You can use both output modes or use one of
them.
l
Dedicated monitors, computer displays, televisions, video matrixes, and high‐definition large‐screen
