25
GVI Security
3.3.14
Sequence
The function executes pre-positioning of the pan, tilt, zoom and focus features in a certain sequence
for a camera. Before setting this function, users must preset at least two preset points.
SEQUENCE LINE
There are eight sets of sequence lines built in the Dome Camera. Using LEFT/RIGHT direction
keys to select a line first and then set its sequence points.
SEQUENCE POINT
Up to 64 points can be specified for each sequence line. The sequence points represent order
of the preset points that the Dome Camera will automatically run. The following setup items,
including PRESET POSITION, SPEED and DWELL TIME, will influence how the camera runs
through each sequence point.
PRESET POSITION
Users can assign a specific preset position to the selected sequence point with this item.
SPEED
Users can set the speed of one sequence point to the next one, and the range of setup speed is
from 1 to 15. Within the range, PAN and Tilt speed varies from 5 ~ 300(degree/sec.)
DWELL TIME
The DWELL TIME is the duration time that the Dome Camera will stay at a sequence point,
and the range is from <0> to <127> seconds. The Dome Camera will go to the next sequence
point when the DEWEL TIME expires. If the setting is <0>, the Dome Camera will stay at this
sequence point until users manually move the camera.
RUN SEQUENCE
Users can command the Dome Camera to run the selected sequence line manually.
EXIT
Select EXIT to exit the SEQUENCE menu and return to the
MAIN PAGE.
NOTE:
Execute the sequence function through a keyboard. Refer to the control keyboard’s
quick start guide for more information.
