Installation & operation manual
16
victr on ener gy
B L U E P O W E R
Install the node
2 mm
1/16"
Note:
Start with the node closed to
the main fuse box.
1. Install the node base onto a suitable
surface.
Note:
•
Align the side of the node marked
with + with the red bus cable
•
Align the side of the node marked
with
–
with the black bus cable.
2. Push the wires into the base.
3. Mark the places of the clips on the
wires.
Warning!
Do not use the node base and
the clips more than one time.
Mounting deforms the clips
and base.
4. Cut the insulation with the cable
cutter.
5. Bend the wire several times until
2 mm (1/10”) of the conductors are
exposed.
