Installation & operation manual
4
victr on ener gy
B L U E P O W E R
1 Introduction
1.1 General
VE.Net DC
Congratulations on purchasing a VE.Net
DC bus power distribution system for
your vessel. The system is delivered as
a set and can be assembled according
to CE standard. It is essential therefore
to follow the installation instructions
carefully.
VE.Net DC is a modern electronically
controlled bus system. Special built in
features reduce the risk of a cable fire or
a low-voltage situation.
Features
Built in features include:
•
An electronic fuse for each load. The
fuse can be reset with the switch
push button.
•
All warnings are both visual and
audible.
•
A warning for broken (navigation)
light or wire.
•
A warning for overloads. The
appliance turns off automatically.
•
A warning for low voltage. The
appliance turns off automatically.
•
An adjustable background light in the
switch panel.
About this manual
This user manual describes the
installation and operation of the VE.Net
DC system. Read this manual carefully
before use or operation of the product. In
case you have any doubt about a
procedure contact your dealer.
1.2 Safety
General
Observe all safety instructions. Use this
product only for the purpose it is
intended for. Please contact your dealer
immediately if a potential danger arises
during the use of this product.
Modifications
Modifications to the product are not
permitted.
Service and technical support
For information concerning specific
settings, maintenance or repair work,
contact your local dealer.
