background image

65

Gear shift system

7.3 

 Continuously variable gear trans-
mission (enviolo)

 WaRninG

Not paying sufficient attention to the road traffic.

Risk of accident and injury!

•  Familiarise yourself with how to use the gear shift sys-

tem.

• 

Come to a stop if you are not able to use the gear sys-

tem safely, e.g. if it malfunctions.

 noTiCe

Damage to the gear shift system caused by improper use.

Risk of damage!

•  When shifting gears, do not pedal hard.
•  When shifting gears, do not pedal backwards.
•  Never change gears when the bicycle is not moving.
•  Shift down the gears in a timely fashion before ascents.

7.3.1 

Basic information

The rear wheel is fitted with a continuously variable gear shift sys-
tem. By turning the twist-grip shifter, the gear shift is continuously 
adjusted.
Enviolo gear transmission systems are available with freewheeling 

gears or with a back-pedalling brake. Check to see which ver-

sion your bicycle is fitted with (see Chapter 

“Bicycle passport” on 

page 117

).

7.3.2 

operation

• 

To shift up the gears continuously, turn the twist-grip shifter to 
the back.

The indicator will move towards “Flat road” (see Fig. 

“‘Enviolo’ 

twist-grip shifter”

).

• 

To shift down the gears continuously, turn the twist-grip shifter 
forwards.

Fig. “Enviolo” twist-grip shifter

1  Level

2  Ascent

1

2

Содержание Din en 82079-1


























































































































Отзывы: