Victoria Din en 82079-1, Руководство пользователя

Страница: 51 / 121

51
Lights
6.4.2.2
attaching and removing the headlight
• To attach the headlight,
push it from the front,
inserting the mounting
connection into the bracket
until you hear and feel it
click into place (see
Fig. “Headlight” ).
• Adjust the headlight
(see Chapter
“Settings”
on page 49 ).
• To remove it, push the lever down and pull the headlight out
from the front.
6.4.2.3
Charging the battery
note:
In order to charge the
rear light and the headlight at
the same time, you will require
two USB charging devices or
USB ports.
1.
Insert the USB plug into
the USB port of a charging
device or computer.
2. Open the cover of the
micro USB socket (see
Fig. “USB socket” ).
3.
Insert the micro USB plug into the micro USB socket of the
rear light and/or headlight.
Fig. Headlight (example)
1 Lever
2 Mounting connection
1 2
Fig. USB socket(example)
1 Button
2 Micro USB socket
1
2
The signal LED will shine red. The charging process will begin and
takes up to 2 hours.
Once the signal LED shines blue, the charging process has fin-
ished.
4.
Pull the micro USB plug out of the rear light and/or headlight.
5.
Close the micro USB socket cover.
6.
Pull the USB plug out of the USB port of the charging device
or computer.
6.4.2.4
Switching on and off
To switch on the lights:
•
Press the button on the rear light and on the headlight (see
Fig. “USB socket” ).
To switch the lights off:
•
Press the button on the rear light and on the headlight again.