4.
Turn the power switch on the side of the
tool to the “ON” position. Turn the selector
switch on the side of the tool to the “JOG”
position.
5.
With the operator on the safety foot switch
side of the tool, use the safety foot switch
to energize the motor and bring the upper
roll down into firm contact with the pipe.
Withdraw foot from the safety foot switch.
CORRECT
INCORRECT
6.
Using the stabilizer handwheel, adjust
the stabilizer roller inward to the correct
position (shown in the drawing above).
Tighten the locking handle.
7.
Prepare to support the pipe. Turn the
selector switch on the side of the tool to
the “NORMAL” position. The arm/upper
roll assembly will return to its highest
position, and the pipe will release.
TM-VE268_23
REV_H
TM-VE268
/ Operating and Maintenance Instructions Manual
