ASSEMBLY
PROCEDURES
Step 3. Plug in Connecter Cable
Fit the cable end into the connection
at the handle, taking note there is a
location notch for the correct placement.
Screw the cable end into the handle
(Figure 4)
Figure 4
Step 5. Assemble the Grass Catcher
Figure 5 Parts
1. Plastic Top,
2. Steel Frame
3. Mesh Bag
Figure 5
Step 4. Recharge the Mower Before
First Use
You must recharge the battery pack
before the first use of the machine, or
the battery pack may suffer permanent
damage. Read the section “Initial
Charging” on page 11.
Figure 6 Clip Steel Frame into Top Cover.
Figure 6
3
2
1
BATTERY MUST BE RECHARGED AFTER EACH USE!
A battery will last longer if charged as soon as it is used.
DO NOT DISCHARGE COMPLETELY AS THIS WILL DAMAGE THE BATTERY!
9
5183 LR00830A Enviromower V3 A2_9.indd 9
5183 LR00830A Enviromower V3 A2_9.indd 9
25/2/09 12:05:22 PM
25/2/09 12:05:22 PM