OPERATING
INSTRUCTIONS
Grass Catcher
NOTE: The grass catcher is shipped unassembled. See ASSEMBLE THE GRASS
CATCHER on Page 9.
TO ATTACH THE GRASS CATCHER:
(Remove the safety key first)
1. Raise the hinged discharge guard on the rear of the mower.
2.
While keeping the discharge guard raised, insert the grass catcher into the holes on both
sides of mower.
3.
Release the discharge guard and press it into the hole on top of the grass catcher to lock
the catcher in place.
4.
Lock the grass catcher in place by sliding the black tab on the handle over the discharge
guard.
TO REMOVE THE GRASS CATCHER:
(Remove the safety key first)
1.
Raise the discharge guard, grab the grass catcher by it’s handle with the other hand, and
remove the grass catcher from the mower by lifting it up.
2. Release the discharge guard.
Figure 15
BATTERY MUST BE RECHARGED AFTER EACH USE!
A battery will last longer if charged as soon as it is used.
DO NOT DISCHARGE COMPLETELY AS THIS WILL DAMAGE THE BATTERY!
17
5183 LR00830A Enviromower V3 A2_9.indd 17
5183 LR00830A Enviromower V3 A2_9.indd 17
25/2/09 12:05:35 PM
25/2/09 12:05:35 PM
