OPERATING
INSTRUCTIONS
Preparing Mower for Operation
Cutting Height Adjustment Lever.
REMINDER:
The safety key, with its built-in circuit breaker, should never be inserted during
assembly, adjustments, cleaning, blade replacement, or when the mower is not in use.
Removing the safety key will prevent accidental starting and help avoid serious personal
injury.
The cutting height adjustment lever is located near the left rear wheel. (Fig 14)
1. Remove safety key
2. Make sure the mower is stable
3. The height adjustment lever is spring loaded.
4. Pull the lever outward (toward the wheel) and out of its position notch.
5. Move the lever to desired notch.
The lever may be placed in one of six cutting height positions:
Lever Position Cutting Height
1
20mm
2
25mm
3
35mm
4
45mm
5
55mm
6
65mm
Figure 14
BATTERY MUST BE RECHARGED AFTER EACH USE!
A battery will last longer if charged as soon as it is used.
DO NOT DISCHARGE COMPLETELY AS THIS WILL DAMAGE THE BATTERY!
16
5183 LR00830A Enviromower V3 A2_9.indd 16
5183 LR00830A Enviromower V3 A2_9.indd 16
25/2/09 12:05:34 PM
25/2/09 12:05:34 PM