![Victa Enviromower ENV369B Скачать руководство пользователя страница 21](http://html1.mh-extra.com/html/victa/enviromower-env369b/enviromower-env369b_instruction-manual_1013458021.webp)
OPERATING
INSTRUCTIONS
To Remove Blade:
1. Remove safety key and take out the battery pack.
2.
Wear heavy gloves to protect hands from cuts and bruises. Turn the mower on its right
side (the side opposite the height adjustment lever) to expose blade.
3.
See Fig 18. Place the 36mm wrench (supplied with your mower) over the steel HEX
ADAPTER. Loosen the 19mm BLADE NUT with an ordinary socket wrench, or similar.
The blade nut turns counterclockwise to loosen. Hold the steel hex adapter steady with
one hand to prevent the motor shaft from turning, while loosening the blade nut with the
other hand.
4.
Remove
blade nut, steel hex adapter, blade, plastic spacer, and steel blade
adapter.
To Attach Blade:
1. To replace a sharpened blade or to install a new blade, reverse steps 1 through to 4 under
the instructions for removing blade. Be sure to replace all parts exactly as removed and as
shown in Fig 18. Observe the correct orientation of the blade. Tighten the blade nut firmly.
Always check the blade for sharpness, damage, and tightness
before and after each use. Replace the blade promptly if it has
been bent or damaged.
Removing and Attaching Blade
Blade Adaptor
HexAdaptor
w/internal flats
Blade nut
w/flange
Figure 18
HEX spanner
(supplied)
Shifter
(not supplied)
BATTERY MUST BE RECHARGED AFTER EACH USE!
A battery will last longer if charged as soon as it is used.
DO NOT DISCHARGE COMPLETELY AS THIS WILL DAMAGE THE BATTERY!
21
5183 LR00830A Enviromower V3 A2_9.indd 21
5183 LR00830A Enviromower V3 A2_9.indd 21
25/2/09 12:05:45 PM
25/2/09 12:05:45 PM