18
Network Camera Setup
This section describes how to configure the network camera and is intended for product Administrators, who
have unrestricted access to all the Setup tools, and Operators, who have access to the settings for Basic, Live
View, Video & Image, Audio, Event, and System Configuration.
The network camera is configured by clicking Setup in the top right-hand corner of the Live View page. Click on
this page to access the online help that explains the setup tools.
When accessing the network camera for the first time, the “Admin
Password” dialog appears. Enter your admin name and password, set
by the administrator.
Note: If the password is lost, the network camera must be reset to
the factory default settings. See section “3.8 Resetting to the Factory
Default Settings”. The default administrator username is “ADMIN” and
password is “1234”.
Note: The configuration screens on your unit may be slightly different, but will be similar in functionality.
Basic Configuration
The device information is displayed on this Basic Configuration page.
