63
RTP
Create a setting for sending and receiving an audio or video on a real-time basis. These settings are the IP
address, port number, and Time-To-Live value (TTL) to use for the media stream(s) in multicast H.264 format.
Only certain IP addresses and port numbers should be used for multicast streams.
• Port Range
-
Start/End port: Enter a value between 1024 and 65532
• Multicast (Stream1/Stream2/Stream3)
This function is for sending Video and Audio to Multicast group.
- Enable Multicast: Check the box to enable multicast operation.
- Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.
- RTP port: Enter a value between 1024 and 65532.
- RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a lower
value. However, if a network status is poor, enter a higher value. When there are
