44
• SMTP (E-Mail) Receiver
-
Receiver: Enter an email address for a receiver. You can register up to 8 e-mail addresses of
recipients.
• SMTP (E-Mail) Test
- Receiver: Enter an email address and click the Test button to test that the mail servers are
functioning and that the email address is valid.
When the settings are complete, click Save, or click Reset to revert to previously saved settings.
FTP & JPEG
When the network camera detects an event, it can record and save images to an FTP server. Images can be
sent as e-mail attachments. Check the "Enable FTP" box to enable the service. This camera can support
multiple FTP servers and user can configure each server settings separately.
• FTP Setting
- Server: Enter the server's IP address or host name. Note that a DNS server must be specified in the
TCP/IP network settings if using a host name.
- Port: Enter the port number used by the FTP server. The default is 21.
- Passive mode: Under normal circumstances the network camera simply requests the target FTP
server to open the data connection. Checking this box issues a PASV command to the FTP server and
establishes a passive FTP connection, whereby the network camera actively initiates both the FTP
control and data connections to the target server. This is normally desirable if there is a firewall
between the camera and the target FTP server.
- Remote directory: Specify the path to the directory where the uploaded images will be stored. If
this directory does not already exist on the FTP server, there will be an error message when
uploading.
- User name/Password: Provide your log-in information.
