Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 174 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Electronic control system
4
83-011-0.
fm
ID
M
English
- 8 -
TECHNICAL SPECIFICATIONS
8
CONNECTING THE EQUIPMENT
9
To carry out this operation proceed
as indicated.
–
Install the equipment (A) on the
special support inside the trac-
tor cab.
–
Run the cable from the tractor
cab along the drawbar.
–
Connect the equipment connec-
tor to the wiring
(B) on the oper-
ating machine.
–
This harness is supplied with a
supply cable with a 3-pin plug
(C) to be connected to the 3-
pole socket (D) on the tractor,
capable of providing up to 20 A
of current to the equipment.
Should it be lacking, the 3-pin
socket supplied with the machine should be installed on the tractor.
The + terminal of the 3-pin socket should be connected directly to the
+ pole of the battery through a cable having a section of at least 5
mm².
Caution
Precaution
Check that the socket on the tractor is protected by a 20A fuse to
prevent dangerous short circuits on the supply cable.
Make sure that the tractor wheels and the cardan shaft cannot dam-
age the equipment cable.
Table 1: Technical data of equipment
Description
Unit of measure-
ment
Value
Display
Type LCD monochrome display
Size mm (inch) -
Display resolution pixels 320 x 240
Data transmission
Serial type RS232 DB9
CAN type CANBUS IN/OUT
Technical specifications
Size mm 250x160x70
Weight kg 0,95
Supply voltage V 9÷14 Vdc
Absorbed power W -
Protection degree (front) IP65
Working temperature °C -10÷60
Humidity (without condensate) 10÷90%
ID
M
-48301
104600.
tif
A
D
C
B