Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 26 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 20 -
Part 2
IMPROPER USE
16
The use of the machine for operations that are different from the purpos-
es being provided for by the manufacturer must be considered as IM-
PROPER USE.
–
Do not circulate in public roads with machines that are not type-ap-
proved and not correctly prearranged to assure its own safety, as
well as the safety of the other users of the street.
–
Do not use the machine as a means to transport people or things.
–
Do not couple the machine to tractors whose category and features
are not suitable.
–
Do not use the machine to pick up products that are different from the
established ones.
–
Do not use the machine to pick up the product (straw, hay, ensiled
products and maize poles) if it has not been prepared in windrows.
–
Replace the shorn "safety bolts" ONLY with original spare parts that
comply with the provisions.
In case of improper use of the machine, the operator assumes
the responsibilities (moral, civil and criminal) for the damages
caused to people or things.
RESIDUAL RISKS
17
Even though the manufacturer complies with the laws in force and adopts
the "code of practice", the listed residual risks still remain.
–
Danger of lethal "whiplash" if the PTO is accidentally started during the
connection of the cardan shaft, which is not performed according to the
correct procedures and sequences.
Do not engage the cardan shaft when the engine of the tractor is
on, the ignition key is engaged and the PTO is activated.
Engage the cardan shaft first to the PTO of the machine, and then
to the PTO of the tractor.
–
Danger of catching and dragging with serious consequences (even mor-
tal) if the operator tries to unflood the machine without using the proce-
dures that are described in the user and maintenance manual, and
without using the relevant devices.
Do not try to remove product clogging in the machine when the
engine of the tractor is on, the ignition key is engaged and the
PTO is activated.
Product clogging removal operations must be performed accord-
ing to the specific procedures (See booklet 4).
–
If the operator uses the machine at speeds that are not suitable to the
ground (steep slopes) and/or with slopes that exceed the maximum al-
lowed levels, the machine may become unstable and/or capsize.
Do not use the machine in soils that are characterised by risks of
instability and/or overturning, such as for example: close to
ditches, precipices, loose soil, steep slopes, etc. If the aforesaid
conditions are present, employ all necessary measures to pre-
vent possible risks.