Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 11 / 192

2
17-205-2.
fm
ID
M
English
- 5 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General and safety information
Part 1
F) Total weight (kg)
G) Mass on lifting eye (kg)
H) Mass on axle (kg)
L) Approval data
PROCEDURE TO REQUEST TECHNICAL ASSISTANCE.
4
In case of need, call the After-Sales Service of the manufacturer, of the local dealer or
an authorised workshop.
If you ask for technical support concerning the machine, specify the data listed in the
identification plate, the approximate work hours and the type of problem being detect-
ed.
GLOSSARY AND TERMINOLOGY
5
A few terms which are widely used in the manual are described below to better explain
their meaning.
–
Routine maintenance: set of operations that are necessary to keep the functionality,
the efficiency and the safety requirements of the machine. The manufacturer estab-
lishes the intervals between the interventions and, if necessary, also establishes the
performance modes for those operations that imply particular procedures.
–
Operator: person that has been selected and authorised among the personnel who
have the qualifications, the competences and the knowledge that are necessary to
drive the tractor to which the machine is coupled, and who are also capable of per-
forming the production activity autonomously, as well as in an adequate, correct and
riskless way.
ATTACHED DOCUMENTATION
6
The specified documentation is supplied together with the manual and/or as an attach-
ment.
–
Declaration of conformity
–
Test certificate
–
Declaration of conformity to the type of machine that is approved for road use (only
in Italy)
The declaration of conformity to the approved type must be used to ask for the vehicle
registration document to the Driver and Vehicle Licensing Centre.
–
Documentation about the installed commercial components (for example, the docu-
mentation about the cardan shaft)
–
Wiring diagrams
–
Hydraulic diagrams
–
User manual of the electronic control system.