Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 62 / 192

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
4
83-004-0.
fm
ID
M
English
- 56 -
Part 2
7. To increase or reduce the working pressure, use the ring nut (E) in
the valve.
Important
The bigger the value of the set working pressure, the bigger the bale
density.
If valve pressure is calibrated at a value that is higher than the max-
imum working pressure of the tractor, the manometer specifies the
value of the latter.
8. Start the engine of the tractor from the driver’s seat.
9. Set the minimum value of the bale diameter by means of the elec-
tronic control system; when this value is reached, the operating pres-
sure set on the valve operates.
ROAD CIRCULATION
44
Road circulation is allowed only for type-approved machines, which are
towed by a tractor with suitable features and category.
The driver of the tractor, which tows the machine, must comply with the
requirements that are established by the laws in force.
Before using the machine in public roads, check that its conditions are
suitable (non-worn tyres and with suitable pressure, efficient lighting and
signalling devices, compliant documents, etc.) in order to comply with the
rules of the road in force.
To improve safety conditions, besides personal experience, you have
also to consider the reported instructions and suggestions.
–
Unload the bale from the machine.
–
Make sure the tail gate is closed in a complete and correct way.
–
Make sure that the machine is correctly coupled to the tractor.
–
Lift the pick-up unit , and then lock it by using the specific chain.
–
Close the cock of the oil-pressure circuit that drives the pick-up.
–
block the parts which could cause sudden unexpected movements.
–
Clean the machine from remains of the picked product to prevent
them from being spread along the path.
–
Check that all road signalling devices are perfectly efficient and visi-
ble.
–
Evaluate the wearing condition and the pressure of the tyres.
–
Make sure tractor PTO is disengaged.
–
Drive carefully, and in detail, reduce the speed in case of irregular
soils. Curve carefully not to compromise the stability of the machine.
–
Every adjustment, except when it is expressly specified, must be per-
formed with disengaged PTO, and tractor engine off. Furthermore,
the ignition key must be disengaged and kept by the driver.
–
The personnel that are authorised to perform the adjustments must
comply with all precautions that are necessary to operate in a correct
way and in compliance with the laws in force about occupational
safety.
–
At the end of the operations, before re-starting the machine, check
that no tool, cloth or other material has been left close to the moving
devices or in hazardous areas.