Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 59 / 192

4
83-004-0.
fm
ID
M
English
- 53 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ General information about the machine
Part 2
5. Interrupt the forward movement of the tractor when the electronic
control system emits a sound signal to warn that the bale has
reached the set diameter.
The binder unit starts the bale binding operation (net, twine or
mixed).
If the binding is net type, during this operation, it is advisable to
keep the rate of the power take-off at 400÷450 rev/min.
At the end of the binding process, the electronic control system emits an-
other sound signal to warn the operator that it is possible to open the tail
gate for bale unloading.
1. Make sure that there are no people and/or obstacles within the range
of action of the tail gate and in the bale unloading area.
2. Adjust the lever (A) of the dou-
ble-acting control valve with
floating position, into the posi-
tion
1 and do not release it be-
fore the completion of the bale
unloading operation.
In case of soils whose
slope can cause risks of
sudden and uncontrolled
movements of the bale, un-
load the bale crosswise to
the slope. Use this precau-
tion especially when the
machine is equipped with
the bale kicker.
A bale can be unloaded with one of
the listed modes.
Machine "without bale kicker"
(standard)
1. During the binding operation,
make the machine go back-
wards by 4÷5 m into the area
where the bale will be unload-
ed. This operation will allow
making up for time.
2. Unload the bale and make the
machine go forward up to the
beginning of the windrow.
During the forwarding move-
ment, adjust the lever
(A) in po-
sition 2 to close the tail gate
back.
1
2
3
ID
M-
21720304100.
tif
A
1
2
3
A
C
ID
M-217221
02900.
pdf