Vicon RV 4116, Руководство по эксплуатации и обслуживанию

Страница: 89 / 192

2
17-211-1.
fm
ID
M
English
- 83 -
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ Failure information
Part 3
As soon as the
pressurization and
closing operations have
ended, the hooks of the
tail gate accidentally
disconnect.
There is a residual
pressure within the oil
return hydraulic circuit to
the tank. Connect the return hose
to an element of the
tractor hydraulic control
valve (floating position).
see "How to couple the
machine to the tractor" in
part 2
Excessive noise of the
transmission. The chains are not
adjusted correctly
Adjust chain tension
see "How to adjust the
transmission chains" in
booklet 2
During the unloading
operation, with the
machine being
equipped with kicker,
the bale keeps inside
the baling chamber.
The roller of the bale
kicker is not positioned in
a correct way. Position the roller in the
first hole of the bale
kicker.
The augers do not
operate correctly.
Too narrow windrow.
Modify the path of the
tractor with movements to
the left and to the right. see "Instructions about
product pick-up" in
booklet 2
The belts do not work
correctly and their
duration is limited.
The path of the forward
movement is not correct. Modify the path of the
tractor.
see "Instructions about
product pick-up" in
booklet 2
the guide rollers are not
positioned in a correct
way
adjust the position of the
rollers see "How to adjust belt
alignment" in booklet 2
Product accumulation
and/or twine in the rollers. Remove the accumulation
of material. see "How to clean belt
guide rollers" in booklet 2
The windrow was not
prepared correctly. Correct the preparation of
the windrow.
see "How to prepare the
product windrow" in
booklet 2
Product whose humidity
percentage is too high. Reduce the humidity
percentage.
Irregular and excessive
extension of some belts. Level the length of the
belts.
Operations to be
performed by specialised
personnel at authorised
workshops
Table 2: Operation irregularities of the machine
Trouble Cause Cure Reference
Table 3: Operation irregularities of the pick-up unit
Trouble Cause Cure Reference
Irregular product pick-
up
Too high pick-up.
adjust the position of the
wheels in the pick-up unit.
see "How to adjust the
height of the pick-up unit"
in booklet 4
Balancing is not correct.
Adjust the suspension
spring. see "How to balance the
pick-up unit" in booklet 4
The baffle plate is not
adjusted in a correct way. Adjust the position of the
baffle plate. see "How to adjust the
baffle plate" in booklet 4