10
XX207-00-02 Rev 910 MP-980DN Camera
“RTCP port for audio”-
The audio channel port for RTCP. It must be the port number of audio RTP plus 1;
default is 5558.
This is not applicable for ViconNet
.
User can modify
Multicast
settings for streams 1~4
(Vicon recommends keeping the default values)
:
“Always multicast”-
Select it to always enable multicast.
“Multicast group address”-
It is used by sources and the receivers to send and receive content.
“Multicast video port”-
The video channel port for multicast; this must be an even number. Default is 5560;
it can be changed to a value between 1025 and 65535.
“Multicast RTCP video port”-
The video channel port for multicast RTCP; this must be the port number of
multicast video port plus 1. Default is 5561 it can be changed to a value between 1025 and 65535.
“Multicast audio port”-
The audio channel port for multicast; this must be an even number. Default is 5562;
it can be changed to a value between 1025 and 65535.
This is not applicable for ViconNet.
“Multicast RTCP audio port”-
The audio channel port for multicast RTCP; this must be the port number of
multicast audio port plus 1. Default is 5563; it can be changed to a value between 1025 and 65535.
This is
not applicable for ViconNet.
“Multicast TTL”-
This specifies the number of routers (hops) that multicast traffic is permitted to pass
through before expiring on the network.
System Settings
This screen programs the camera time and date settings.
"Host name"-
The text that displays at the top of the Main page.
“Turn off the LED indicator”-
Check this option to shut off the LED on the rear of the camera;
this is used as a security measure to prevent the camera’s operation from being detected.
Vicon
recommends this be checked to have LED turned OFF.
"Keep current date and time"-
Click on this to retain the current date and time of the camera.
An internal real-time clock maintains the date and time even when the power of the system
is turned off.
Vicon recommends using the current date and time
.
"Synchronize with computer time"-
Synchronize the date and time of the camera with the local co
mputer. The read-only date and time of the PC is displayed as updated. (If this option is selected, v
