Final assembly
63
Setting up work
Adjusting the
working depth
The clearance of the tines from the ground is adjusted in the work
position via the crank.
Use the tractor's hydraulic control unit to fold the machine into its
work position.
Drive forward approximately 2 metres until the running wheels are
correctly aligned.
Release the crank locking device.
Adjust the working depth using the crank.
Secure the crank with the crank locking device to ensure it does not
twist.
The tines should lightly touch the ground.
Adjusting the tines
The ejection angle of the spring tines is adjusted by means of taper
washers. This function enables consistent, uniform and optimum work
results. The smaller the angle, the steeper and more aggressive the
tine position.
Correct the tine position of each tine:
Attach taper washers to tine supports.
Angle of tine position (1): gentle (8°).
Angle of tines without taper washer: normal (4°).
Angle of tine position (2): aggressive (0°).
Crank locking device
Crank
Tine support
Taper
washer
1
2
Содержание Fanex 1134 T
Страница 70: ...Circuit diagrams 70 Lighting equipment USA...
