Final assembly
49
1. Aligning the side
devices in the
transport position
The side devices are first aligned in the transport position via the
swivel head of the hydraulic cylinder.
Use the tractor's hydraulic control unit to bring the implement into
the transport position.
Drive forward a few metres until the running wheels are correctly
aligned.
Use the hydraulic control device to relieve the load on the hydraulic
cylinders.
Switch off the tractor and secure it.
Check the alignment of the side devices.
Position
Solution
Correct transport position.
•
The side devices are aligned at
90° to the centre device, and
•
the side devices are parallel to
one another.
Reduce the length of the hydraulic
cylinder piston rod on the right-
hand side device.
Undo the lock nuts.
Turn the piston rod into the
swivel head until the right-hand
side device is parallel to the
left-hand side device (A).
Tighten the lock nuts.
Check the positioning in the
transport and work positions.
Reduce the length of the hydraulic
cylinder piston rod on the left-hand
side device.
Undo the lock nuts.
Turn the piston rod into the
swivel head until the left-hand
side device is parallel to the
right-hand side device (A).
Tighten the lock nuts.
Check the positioning in the
transport and work positions.
Swivel head
Piston rod
A
A
Содержание Fanex 1134 T
Страница 70: ...Circuit diagrams 70 Lighting equipment USA...
