Vibration Research VR9500, Руководство по оборудованию

Страница: 10 / 32

VR9500 Hardware Manual 6
Installation
CONTINUED
Installing on a Flat Surface
The surface must be able to support the weight of the VR9500 and its cables.
·
Set the device on a flat surface; leave 2in (5.08cm) on each side and 5in
(12.7cm) at the back.
·
Make sure the device has proper ventilation.
Installing on a Device Rack
CAUTION : Read the safety information in this guide as well as the safety
information for other devices that connect to or support the VR9500.
CAUTION : Disconnect all cables from the device before mounting the device
in a rack or cabinet.
CAUTION : When mounting multiple devices in a rack, mount the devices
from the bottom up.
·
Place the supplied rack-mounting bracket on one side of the device. The
mounting holes on the device should line up with the mounting holes on the
rack mounting bracket. The following figure illustrates where to mount the
brackets.
·
Remove the feet from the bottom of the device.
Other Installation Methods
CAUTION : Always mount the VR9500 horizontally.
The VR9500 requires the ventilation provided by a normal horizontal orientation;
mounting in other orientations is not recommended.