Batteries
To select, press “OK” when highlighted
To change setting, use left/right arrows as needed
To exit, press “OK”, (entire setting field will be
highlighted)
1.5 Press Down arrow to highlight exit door icon.
1.6 Press “OK” to exit back to start screen
2. HORIZONTAL ALIGNMENT APPLICATION
SETTINGS FIXTURLASER GO
Application settings are accessed after entering the
horizontal shaft alignment program.
2.1 Press the down arrow to move the black highlight to
the bottom row of icons.
2.2 Press the left/right arrow to move the black highlight
to the Application Setting icon.
2.3 Press the “OK” button.
2.4 Press the up arrow to move the black highlight over
the desired setting
From top to bottom:
Sampling Time
Normal
or Long
To select, press “OK” when highlighted
To change setting, use left/right arrows as needed
To exit, press “OK”
Tolerance Table
Machine RPM
To select, press “OK” when highlighted
To change highlighted value, use up/down arrows,
then press “OK”. Also exits tolerance table.
2.5 Press down arrow to highlight exit.
2.6 Press “OK” to exit back to start screen.
3. MEMORY MANAGER FIXTURLASER GO
The memory management application is accessed
from the start screen.
C H A P T E R 7
21
Содержание Fixturlaser Go
Страница 1: ...Get Going T R A I N I N G M A N U A L 2010 Vibralign Inc...
Страница 3: ......
Страница 6: ...C H A P T E R 1 Pre Alignment Considerations 3...
