VibrAlign Fixturlaser Go, Руководство по обучению

Страница: 15 / 40

7.2 Press the “OK” button to select.
ƒ
The GO is now “live” and will display the values
in whatever orientation the sensors are pointing.
ƒ
To correct horizontal misalignment be sure the
sensors are in the horizontal plane.
ƒ
Use the on screen guidance to rotate sensors to
horizontal if needed.
7.3 Adjust the feet in the direction of the arrows.
ƒ
The Angle and Offset values will change as the
feet are adjusted.
ƒ
The LED will change from Red to Orange to
Green as the angular and offset values are
brought into tolerance.
ƒ
Green LED indicates alignment in tolerance. It’s
not necessary to adjust the foot values to zero.
ƒ
Tighten the bolts using torque pattern.
8. RE-MEASURE
8.1 Move the black highlight to the Re-measure icon if
needed.
8.2 Press the “OK” button to select.
ƒ
Verify selection.
8.3 Rotate sensors back to the starting measuring
position and repeat the process.
9. VERIFY RESULTS & DOCUMENT FINAL
ALIGNMENT
ƒ
Both the vertical and horizontal misalignment values are
displayed.
ƒ
Verify the angle and offset values meet or are less than
the tolerances.
U S I N G T H E F I X T U R L A S E R G O
12