Viavi OneExpert DSL ONX-580, Руководство пользователя

Страница: 147 / 282

OneExpert DSL User's Guide
22052280, Rev. 015 April 2019
Chapter 8 Optical Tools
147
video of the fiber.
4. To change the magnification level, press Low Magnify/
High Magnify . The current selection is a larger text size.
5. To select the inspection profile, press Profiles .
If you have a custom profile, you can use it on the
OneExpert by putting the file into the configs/Microscope
folder. For more information on copying or transferring files
using the file manager, see "Managing files" on page 72 .
6. Press Options and then select any of the following:
• About Scope
– Provides view details about the
microscope, such as model number, firmware version
and serial number.
• Run Analysis – Specify whether to perform an
analysis on the fiber or simply take a snapshot
without an analysis (Freeze).
• Auto-center live – When checked, the live picture automatically centers on the
fiber center. If not checked, the picture will center at the last location of a fiber
center following an analysis. High magnification is always automatically centered.
• Show Focus Meter – Specify whether to show the focus meter (the blue and
white bar that appears on the right side of the screen).
• Tip
– Specify which tip is being used on the microscope: Standard Tips (with
BAP1) or Simplex Long Reach (-L) Tips.
7. Do one of the following:
• Manually inspect the fiber.
– On the Options pop-up, verify that the Run Analysis checkbox is not
checked. The Analyze button changes to Freeze.
– Press Freeze. This captures a still image of the fiber.
• Analyze the fiber.
– On the Options pop-up, verify that the Run Analysis checkbox is checked.
The Freeze button changes to Analyze.
– Press Analyze .
The test automatically centers the view (if specified to do so), captures an image,
and then analyzes it. The test result shows defects and scratches.
8. To save the results, press Save and then specify the file name for the still image. The
filename can be up to 50 characters, so if desired, details such as the company name,
technician, and location could be included.