Viavi OneExpert DSL ONX-580 Скачать руководство пользователя

Страница: 63 / 282

OneExpert DSL User's Guide

22052280, Rev. 015

April 2019

Chapter

3 Utilities

4. From the

System

menu, press the

StrataSync

icon. The StrataSync settings menu

appears.

5. Specify the following settings:

• System Settings StrataSync Account ID

– Enter the account identification

number. Only change this if necessary.

• StrataSync Tech ID/ User ID

– Enter the technician/user identification number.

• Server Address

– Enter the DNS address for the server. The default address is:

https://stratasync.viavisolutions.com

• Server Port

– Enter the server port number. The default port is: 443

6. Press the

Start

button. As the process runs, the sync state is displayed on the screen.

• Upon synchronization with the StrataSync server, the unit will send to the

server the following information:

– The unit’s serial number.
– The unit’s hardware information (constituent assemblies and their

revision levels).

–  The unit’s MAC address.
–  The unit’s user settings - name (user/technician) and ID.
–  The last calibration date of the copper board (if applicable; this is not

provided for the ONX-580A, which does not have a copper board).

– Software update milestones (includes status and warnings, if applicable)

If the configuration information contained on the server is newer than

that on the unit, the server will be considered to be the most up-to-date.

• The server will then send any files to the unit being synchronized that it

determines are newer than those on the unit.

• The unit will then send any reports, work orders, configuration profiles, XML

results, screen shots, etc. that have been saved on the unit since the last

configuration.

• The server then applies any applicable options to the unit.
• Copy (“clone”) the configuration settings for the base unit, as well as any

company-specific configurations such as custom filters, web bookmarks, and

FTP passwords. This can be used to create a “golden” unit.

NOTE:
If an Option Code was entered as a part of synchronization,

power must be cycled to the unit to complete the process and

initialize the option.

Содержание OneExpert DSL ONX-580



























































































































































































































































































Результаты поиска

Содержание OneExpert DSL ONX-580

Отзывы:

Похожие инструкции для OneExpert DSL ONX-580

Бренды по названию

Популярные бренды

Viavi OneExpert DSL ONX-580, Руководство пользователя

Результаты поиска

Содержание OneExpert DSL ONX-580

Отзывы:

Похожие инструкции для OneExpert DSL ONX-580

Бренды по названию

Популярные бренды