background image

!

AIS PLOTTER

Triangle points in the direction of the target’s heading.

This target meets one or more of your alarm criteria.

An aid to navigation.

Search and rescue transponder (AIS SART) or man overboard device (AIS MOB).

Target is marked as a member of your “fleet”.

Selected target. Press the 

Select

 button to view the complete target details.

Target is “lost”. No AIS data has been received from the target within the 
expected intervals.

Display is oriented North-Up for this profile. Use setup to change.

AIS data is not being transmitted. Check the AIS Status screen.  
You must configure your vessel MMSI in order to transmit. 

!

•  Color of targets change depending on their alarm state.
•  The target icon points in the direction of the targets heading.  If heading data 

is not available it will use course over ground (COG).

•  You must have a valid GPS fix for any targets to be shown on the AIS plotter.
•  Go to 

www.vespermarine.com/watchmate850

 for additional information.

Menu

Select

Prev

Next

Plotting range

Current  

Profile

Nav Aid

Your  

position

Guard 

range

Transmit 

warning

Ordinary target

Dangerous target

Safety messages

Your heading

Total targets and 

 filtered  targets

[6nm] 

Coastal

1 Msg

6 Targets 

1 Filtered

045T

Содержание WatchMate 850

















Отзывы: