!
TROUBLESHOOTING
STATUS
DESCRIPTION
MMSI CONFIGURED
You must have a valid MMSI programmed before you
can transmit your position (see configuration section).
SILENT MODE IS OFF
Silent mode is on. If this is not intentional check silent
mode is switched off in AIS settings.
STARTUP COMPLETE
Before the WatchMate can transmit it needs 1 minute
to initialize.
GPS POSITION FIX
The WatchMate requires a GPS fix before it can transmit
its position. This may take a few minutes. If it is taking
a long time check your GPS antenna installation (see
GPS antenna section) and GPS signal strength using the
menu to select GPS Status.
POSITION REPORT SENT
This may happen from time to time in very busy areas
with lots of AIS traffic. This is normal behaviour for
a Class B AIS device.
VSWR
Check your antenna installation. Use the VSWR meter
on the AIS Status screen. A poorly tuned antenna, bad
cabling or connections are typical reasons for a high
VSWR. Your WatchMate will continue to operate
normally but transmit performance will degrade.
The VSWR meter is a black bar that extends from the
left. Lower VSWR is indicated by a shorter black bar.
The symbol indicates your AIS data is not being transmitted. It is located
at the bottom left of the WatchMate screen. Use the menu to view the AIS
Status.
!
!
!
!
!
!
1:1
>5:1
Visit
www.vespermarine.com/watchmate850
for comprehensive answers
to frequently asked questions, the complete user manual, technical support,
downloads, local dealer contacts and more...
GOT A QUESTION?
Содержание WatchMate 850
Страница 1: ...WatchMate 850 Install Guide ...