vesper marine WatchMate 850, Инструкция по установке

Страница: 9 / 16

• Before the WatchMate can transmit your position you must configure your
vessel details and enter a valid MMSI number. Your MMSI may have already
been entered by your dealer.
You must have an assigned MMSI for your
vessel. If you do not have an assigned MMSI, contact the relevant authority
in your country.
• You can configure your WatchMate on-screen in setup mode or using the
vmAIS PC/Mac utility software. vmAIS is available for download from
www.vespermarine.com/watchmate850 .
• Once you save the MMSI number you cannot change it. If you need to
change the MMSI, please contact an authorized dealer or Vesper Marine.
• To configure your vessel details use the on-screen setup mode as shown
below:
CONFIGURATION ON-SCREEN
Modify
Modify
Your vessel AIS details
MMSI: 0 0 0 0 0 0 0 0 0
Type: Pleasure craft
Name:
Call sign:
OK
OK
GPS
Antenna
A
0m 0m
0m
0m D
C
B
Move the selection box to the previous field
Move the selection box to the next field
Enter a new value for the selected field
Save your changes and exit configuration