vesper marine WatchMate 850, Инструкция по установке

Страница: 2 / 16

Your AIS WatchMate
®
850 is a Class B Transponder with
an integrated display and GPS receiver.
The WatchMate provides information to improve your situational awareness
and assist in avoiding collisions at sea. Because it consumes very low
power, it may be left turned on whenever your vessel is underway. It works
by interpreting Universal Shipborne Automated Identification Systems (AIS)
messages which are sent over VHF by transponders installed on other vessels.
The AIS system uses two dedicated VHF channels designated for this purpose
and with the installation of the WatchMate to receive these signals you can
view AIS information. You can also distribute AIS information to other devices
on board your vessel (e.g. chart plotters and computers) using NMEA 0183 and
USB. In addition, your vessel data is transmitted to other AIS-equipped vessels
within range.
For more information go to www.vespermarine.com/watchmate850.
OPTIONAL ACCESSORIES
= Item Included
= Item Included
WatchMate 850
Mounting Bracket
10 pin power/data cable
AIS/VHF antenna
MMSI number
2A fuse or circuit breaker
1m USB cable (for configuration)
Panel mount template, gasket and 4 screws
Waterproof 5m USB cable with locking security ring
SP160 Antenna Splitter
External GPS antenna with 10m cable
Consider other equipment you may need to install on your vessel (e.g.
additional cable, cable ties, mounting screws, wire strippers, screwdriver etc.)
WHAT YOU NEED TO GET GOING