• Install vmAIS on your PC or
Mac.
• Plug the WatchMate in to
an available USB port
(see USB section).
• Select the appropriate
COM port and click the
Connect
button.
• Enter your vessel details
carefully and click on the
Save Data
button.
Once you save the MMSI
number you cannot change it.
YOU’RE FINISHED!
If you have a GPS position and there is no warning symbol in the status bar,
your WatchMate is transmitting your position and is successfully installed!
Your position will be transmitted every 3 minutes when your speed is under
2 knots or every 30 seconds otherwise. Your vessel information (e.g. name,
callsign, etc) is transmitted every 6 minutes. If the warning symbol is still visible,
choose the AIS Status display from the menu to display the reason. See the
troubleshooting section for the probable cause.
CONFIGURATION USING A PC OR MAC
You can also configure your WatchMate using the vmAIS PC/Mac utility software.
vmAIS is available for download from
www.vespermarine.com/watchmate850
.
Before the WatchMate can transmit your position you must configure your vessel
details and enter a valid MMSI number. Your MMSI may have already been entered
by your dealer.
You must have an assigned MMSI for your vessel.
If you do not have
an assigned MMSI, contact the relevant authority in your country.
Vesper Marine releases downloadable updates from time to time. These updates
often add new features. To be notified when a new update is available please
register your WatchMate at
www.vespermarine.com/register
.
REGISTER YOUR WATCHMATE
Содержание WatchMate 850
Страница 1: ...WatchMate 850 Install Guide ...