Vertiv
|
XTE 802 Series Walk-In-Cabinet (WIC) Description & Installation Manual (631-205-434)
|
Rev. D
106
OSP CABLES
Important Safety Instructions
DANGER!
Adhere to the “Important Safety Instructions” presented at the front of this document.
Safety Precautions
DANGER!
RISK OF ELECTRICAL SHOCK, OSP CABLES
If buried cables are used, check the cable sheath for voltage in accordance with local standards. If
voltage is detected, do not proceed with the installation. Contact the supervisor and do not proceed
until the voltage hazard is eliminated.
NOTE!
The following procedures are recommendations only, and are performed in conjunction with the
procedures and training that adhere to local practices.
Sealing Cable Entries
After cables are installed, refer to “Sealing Cable Entries” on page 81 and seal all cable entries.
Installing Fiber Cables
Install fiber cables using a 1.5" x 1.5" fiber routing duct provided along the length of cable rack for fiber
management.
