Vertiv WSN Flex Sensor, Инструкция по установке и эксплуатации

Страница: 32 / 56

Figure 7.2 System—Date and Time Page
The clock does not increment the display on this page in real time. Each time the page is refreshed, it will display the actual
time on the gateway. Refreshing this page can be used as confirmation that the clock has been set and is advancing
properly.
After the time and date have been set on the gateway, the IP address of each Ethernet port should be set if something other
than the default settings are desired.
7.1.2 Reconfiguring a Port
To reconfigure a port, navigate to the System—IP Config page . See System—IP Config Page below.
Figure 7.3 System—IP Config Page
To reconfigure either port, enter the new values for the I P Address, Subnet Mask, and Gateway and click Save .
If the port configuration is changed for the same port that the PC or laptop is connected to, the PC or laptop Ethernet
settings will need to be updated to match the same subnet before access to this configuration page can be restored.
Vertiv | Vertiv™ Wireless Sensor Network (WSN) Installer/User Guide
28