Vertiv WSN Flex Sensor, Инструкция по установке и эксплуатации

Страница: 25 / 56

6.3 Sensor Mounting Considerations
Sensors are shipped with a mounting bracket and accessories to support magnetic, zip tie and wall mount applications. The
mounting bracket uses a hook assembly that aligns with the back of the sensor and the extended battery pack. The hook
assembly can be used for either. The extended battery pack has extended hooks with metal contacts for powering the
sensor when present with power.
Installation Mounting Consideration Installation Action
Mounting to perforated metal door
• Locate and place mounting bracket on rack face.
• While magnetized, use the zip ties to securely attach bracket to perforated door.
• Once attached, slide extended battery pack or sensor onto the mounting bracket until it clicks.
Mounting to ferrous surface
• Slide the extended battery pack or sensor onto the mounting bracket until it clicks.
• Place the completed assembly onto the metal surface.
Mounting to a solid wall or surface
• Use the included screws or anchors as needed to attach the mounting bracket to the surface.
• Once attached, slide the extended battery pack or sensor onto the mounting bracket until it
clicks.
Table 6.3 Sensor Mounting Considerations
Figure 6.2 Mounting Bracket Detail
Item Description
1 Zip tie holes
2 Wall screws
3 Rare earth magnet
6.4 Sensor Mounting Bracket Kit
The mounting bracket supports a slide and hook mechanism for mounting the sensor which also provides a cover for the
battery compartment located on the bottom of the sensor.
6 Sensor
21