Chapter 3 Web Interface of RDU501
93
RDU501 Intelligent Monitoring Unit User Manual
Note
1.
Based on SNMP V2, SNMP V3 adds user authentication and encryption strategies.
2.
If the "Do not authenticate without encryption" strategy is selected for the
User type
, the
Authentication type and
encryption type
drop-down box is grayed out and cannot be set.
3.
The current
encryption type
only supports "DES";
4.
The user needs to customize the authentication and encryption passwords of more than 8 characters, and the password must be
the same as the password set by the host of the SNMP agent data receiving end. Otherwise, the password cannot be decrypted
and received.
After completing the parameter settings, click the
Add
button to add the NMS;
To modify the NMS settings, select the NMS you want to modify, modify the settings, and then click the
Modify
button to save the settings.
To delete the NMS, select the NMS you want to delete and click the
Delete
button to delete the NMS.
Figure 3-138 SNMP (V3) setting
Note
RDU501 does not provide SNMP proxy service by default. If SNMP service authorization is required, please contact Vertiv
Customer Service Center for purchase.
4. Security settings
Only administrators can browse and configure
Security settings
.
Click the
Network Settings
submenu under the
System Settings
menu, and then click the
Security Settings
tab.
The page shown in Figure 3-139 pops up.
