Chapter 3 Web Interface of RDU501
61
RDU501 Intelligent Monitoring Unit User Manual
Note
Report Name: For the name of the report added on the Curve Report Settings page, please refer to the next section.
3. Curve report settings
As shown in Figure 3-87, all the curve report configurations that have been added are displayed. Click the delete
button on the right to delete the corresponding report configuration.
Figure 3-87 Curve report settings
Enter the report name (for example, "TH23"), select the device type (for example: "ENV_TH"), select the device (for
example: "ENV_TH"), select the signal (for example: "Temp 21"), and enter the reference line value (for example:
The minimum interval is “20” and the maximum is “30”. Click the
SAVE
button to add a curve report, as shown in
Figure 3-88. You can add up to 16 reports.
Note
Up to 8 curves can be displayed in the same icon system, ie 1 <= m*n <= 8 (m: number of devices selected, n: number of selected
signals). For reporting requirements with more than 8 curves, please export historical data processing manually.
Figure 3-88 Curve Report Settings - Add Report
Smart report
Click the
Smart Report
submenu under the
Data Management
menu to pop up the page shown in Figure 3-89.
There are two tabs for
Smart Report View
and
Smart Report Settings
.
Figure 3-89 Smart Report View 1
