Vertiv Liqui-tect LP6000, Инструкция по установке и эксплуатации

Страница: 4 / 82

5.3.1 Leak Settings 37
5.3.2 Virtual Zone Settings 39
5.3.3 Slave Controller Settings 39
5.3.4 Slave Zone Settings 40
5.3.5 Network/IP Settings 40
5.3.6 Network Statistics 41
5.3.7 Web Settings 42
5.3.8 Map Settings 42
5.3.9 Clock Configuration 45
5.3.10 NTP Configuration 45
5.3.11 Email-SMTP/DNS Configuration 46
5.3.12 SNMP/Syslog Configuration 47
5.3.13 EIA-485 Port/Modbus Configuration 48
5.3.14 Configuring the Controller as a Modbus Master 49
5.3.15 BACnet Configuration 53
5.3.16 Alarm Management 54
5.3.17 System/Flash Management 55
5.4 Historical Data 58
5.4.1 Acknowledging Alarm-history Events 58
5.4.2 History Text Files for Download 59
5.4.3 Viewing the Current-leakage Trends 59
6 Modbus Communication Protocol 61
6.1 Transmission Modes 61
6.1.1 Exception Responses 61
6.2 Modbus Packet Communication 62
6.2.1 Function 03: Read Output Registers 62
6.2.2 Function 04: Read Input Registers 63
6.2.3 Function 06: Preset Single Register 72
6.2.4 Function 16: Preset Multiple Registers 73
6.3 RTU Framing 73
7 Preventive Maintenance 75
8 Troubleshooting 77
Vertiv | Liqui-tect LP6000 Installer/User Guide | 4