Vertiv Liqui-tect LP6000, Инструкция по установке и эксплуатации, Страница: 42 / 82

5.3.7 Web Settings
The Web Configuration page provides several configuration and customization options:
• Customize the user name and password for the web UI.
• Customize the home page graphic.
FIELD DESCRIPTION
Web Username Sets user name to access web UI.
Web Password Read Only Sets password for view-only access to web UI.
Web Password Read/Write Sets password for view and edit access to web UI. Allows updates to Liqui-tect configuration.
Web Refresh Rate Sets frequency to check for new data and reload web page. Zero (0) disables automatic refresh.
Main Page Image Selects an image or interactive map to display on home page. See Uploading Images.
Table 7.7 Web Configuration fields and options
5.3.8 Map Settings
The Map Configuration page uploads up to 10 facility maps that can be populated with leak-detection
data for interactive leak-detection maps accessed from links on the home page. See
Facility Reference
Maps on page 42.
FIELD DESCRIPTION
Floor Map Link Text Displayed text for the link.
Floor Map Interactive Enables/Disables Interaction with the map. See Facility Reference Maps on page 42 to set up an interactive map.
Map Type
For map 1, selects the type of map. Options are:
•
Distance read = map overlay that plots points to display leak detection in a single zone.
•
Master Zone Map = displays all configured zones on a single map and displays the alarm condition
for the zones.
Note: Map type is only available on map 1.
Master Zone Map Links
Enables/Disables linking the zones on the master-zone map to specific zone maps or the web UIs slaved devices.
Options are:
Disabled = links are disabled.
Maps 2-10 = links to the other loaded maps for the zones.
Slave Web Page = links to the web UI of the slaved devices in the zones.
Zone/Controller
Designate the zone or slaved Liqui-tect controller to which the map links. Zone/Controller 1 is reserved for a single
or the master Liqui-tect controller.
Table 7.8 Map Configuration fields and options
Facility Reference Maps
You can upload up to 10 facility maps and add interactive leak-detection data to the maps for real-time
leak-detection equipment location and status and for active-alarm location.
The mapping process creates an overlay for an uploaded map image based on coordinates designated
using the Map Alarm links at the bottom of the
Map Settings on page 42.
NOTE: Do not attempt interactive mapping before the monitored area is completely installed and
assembled and all leak-detection equipment is in place, tested and functional.
The file requirements for the uploaded map image are:
• File size: 500 kb or less
Vertiv | Liqui-tect LP6000 Installer/User Guide | 42